Note: Combo products (such as multiple printers or 1 printer+extended roll) will be shipped in multiple packages.

1, Batch print. It can repeat print a model many times, but we should test 

some prints first. After you adjust the best slice setting, you start repeating 

the print. Or it can print many models at once; just put these models in a slice together.

2. Long model print, it can print a model without the length limit.

3. Overhand print, the back print angle doesn’t need support.

1.100% auto leveling by machine after assembly. Print head with sensor, 

it will detect the distance with the bed platform,and match with the slice 

setting Y offset -0.1 to -0.2mm（depending on the filament Stickiness ), 

then it will sticker well on the belt.

2. Metal conveyor belt, mainly coated with PEI. Printing area is warm for sticker 

models on, and it is strong hardness, High models on it will not shake. Detach 

model area is cold, it is easy to separate the model from the conveyor belt.

3. Klipper firmware/Fast printing. Print speed is over 400 + mm/s, Powered 

by the Open-source Klipper system Klipper firmware and designed the xy axis 

moves very smoothly, the z-axis is powerful with a gearbox and we put it inside the roller.

4. Enclosure box . For printing high temperature filament, such as ABS Nylon etc. 

keep the model not warping up and cracking.

5. Extend roll. for printing long models, keep the print side sticker well, and keep the model not bent.

6.  Wifi and Camera. It can be remote control by phone or computer, if filament 

is enough, you can keep it working for long timeeven when you are not behind the printer.

7. 4.3-inch capacitive touch screen and Led light, you can check the status at midnight.

8. Filament inputting detection, if the filament doesn't keep going over 12mm, 

the printer will pause printing. Then you need to check if there was something 

wrong with the filament clogged the nozzle, or if the filament ran out. 

After reloading the filament, it can continue printing.

9. Easy assembly and Stable printing. Based on auto leveling, it sticker very well, 

the metal belt keeps models no shaking, all main electronic parts are designed by 

ourselves, and we use the good components on the heater, thermistor, fans, power 

supplier, etc.After 6 months of testing and adjustment, printing is quite stable now. 

(print a great model needed with a correct slice setting).